Compliance
Compliance checklist
The checklist compares the design with the items of the standards set. The design answers the items it can check, and you answer the others.
Capabilities
Checklist items and output
Each item states the criterion, the value provided, the limit and a status word. Answers apply at once, with no new design run.
Items
- Compliance checklist per standards set: CEA, CBIP, IEC and IEEE items, or NESC and NFPA, IEEE and ANSI, and interconnection items
- Standard cited per item, clause overrides in the Library
- Checks by the design, with the value provided and the limit
- Answers per item, with a note and the evidence
- Library of clause references, applied to the checklist
Output
- Output in XLSX and PDF
- Stored per issued revision, with the document package
Standards sets
Lists and clauses per standards set
The lists, the checks from the design and the clauses follow the standards set of the project.
| Item | IEC, CEA and CBIP | ANSI, IEEE and NESC |
|---|---|---|
| Lists | CEA, CBIP, IEC and IEEE items | NESC and NFPA, IEEE and ANSI, and interconnection |
| Grid connection items | CEA grid connectivity and metering regulations | FERC Order No. 827, IEEE 2800-2022, NERC PRC-024-4 and PRC-029-1 |
| Checks from the design | Clearances, earthing, short circuit, lightning protection and auxiliary supply | NESC clearances and fence, grounding, IEEE C37.010 duty, IEEE 998 coverage, battery and charger |
Document
Sample compliance checklist
Documents of a sample project, generated by SubstationLayout and marked as samples. Not for construction. The manual items of this sample carry sample answers.
Compliance checklistSSL-C-CMP-001 · Rev 0 · 5 pages · PDF · 63 KB
Download